This research includes a study of the behavior of beams made from No-fine concrete using 10 maximum size of aggregate and improved by SBR polymer. From test results, the effect of addition of polymer to concrete leads to improved compressive and flexural strengths, The beams improved by polymer failed under loads more than the beams which were made from reference concrete. The percentage increases in compressive strength for No-fines polymer concrete compared with reference concrete were (41%, 58, 38%) for ages (3,7,28) days respectively
Abstract: The presented investigation studies the effect of steel fiber content on the dynamic properties of High Performance Steel Fiber Concrete by using non-destructive testes; Vibration tests (Electrodynamics tests) were used to obtain the dynamic modulus of elasticity, dynamic shear modulus (modulus of rigidity), damping capacity, and dynamic Poisson‘s ratio. The results demonstrated in general an improvement in dynamic properties, which were tested for example, the percentage increasing in compressive strength relative to the reference concrete were 2.5%, 6.6%, 5.8% for High Performance Concrete (HPC) with 0.5%, 1%, and 1.5% steel fiber by volume of concrete respectively.
Abstract: This work investigates some properties of chopped worn-out tires concrete (Ch.W.T.conc.). It is a type of concrete characterized by the incorporating of Ch.W.T into the mixes as a partial replacement of volume of aggregate (sand and gravel of equal proportion). Three mixes of Ch.W.T conc. In addition to the reference mixes were selected, using Partial Replacement Ratio (PRR)of 30%, 40%, and 50%.The tests which were used in this study were: compressive strength, modulus of elasticity (static and dynamic), and impact resistance (low and high velocity). It was found that incorporating Ch.W.T in concrete effect on the properties of concrete, for example the percentage decreases in compressive strength were 41%, 46.7%, and 52.4% for concrete with 30, 40, and 50% Ch.W.T. PRR by volume of aggregate (50% sand, 50% gravel) respectively. However, it gave good indicator to be utilized as a new construction material in many applications.
Abstract:Many of researchers study the uses of chopped worn-out tires as a replacementmaterial to production special types of concrete. In presented work, the worn-out tireswere used as fibers which have dimensions of 1×1×3 cm. The fibers used as a partialreplacement from volume of coarse aggregate. Two mixes of fiber worn-out tires(F.W.T.) concrete in addition to reference mix were selected, using PartialReplacement Ratio (PRR) of 20% and 30%. The tests which were used in this studywere: compressive strength, splitting tensile strength and flexural strength. It wasfound that incorporating of F.W.T. in concrete effected negatively on most propertiesof concrete, for example the percentage decreases in compressive strength relative toreference mix at 28 day were 20% and 27.3% for concrete with 20% and 30% F.W.T.by volume of coarse aggregate respectively. However, it gave good indicator to beutilized as a new construction material in many applications.
ABSTRACT: Many of researchers study the uses of chopped worn-out tires as a replacement material to production special types of concrete. In presented work, the worn-out tires were used as fibers which have dimensions of 1×1×3 cm. The fibers used as a partial replacement from volume of coarse aggregate. Two mixes of fiber worn-out tires (F.W.T.) concrete in addition to reference mix were selected, using Partial Replacement Ratio (PRR) of 20% and 30%. The tests which were used in this study were: compressive strength, splitting tensile strength and flexural strength. It was found that incorporating of F.W.T. in concrete effected negatively on most properties of concrete, for example the percentage decreases in compressive strength relative to reference mix at 28 day were 20% and 27.3% for concrete with 20% and 30% F.W.T. by volume of coarse aggregate respectively. However, it gave good indicator to be utilized as a new construction material in many applications.